MacBook Pro Black Screen of death- Still on our series of Black Screen Issues, amazingly MacBook Pro is not left out of devices faced with these issues. The MacBook pro Screen of Death refers to the black screen and displays nothing although the system is on, and it is very frustrating. Many reasons or causes lead to the black screen experienced just as there are many possible solutions, and this is a growing concern for many MacBook Pro users. But not to worry, you are in the right place because this article is focused on providing you with Quick Fix to MacBook Pro Black Screen of Death.
QUICK FIX TO MACBOOK PRO BLACK SCREEN OF DEATH [SOLVED]
There are various event or actions that lead to “MacBook Pro Screen goes Blank, and unresponsive” or “MacBook Pro Screen goes off intermittently”. The primary cause of MacBook Pro Black Screen of Death is power issues which can be as a result of faulty charging power cable, a bad battery which does not hold or sustain charges, screen brightness settings, corrupted display settings among other issues. On the other hand, Microsoft Company has reported that it could be because of malware. Others believe that it could be software or hardware issues, overheating of system components, and so on. Anyway, it is essential that you take caution to avoid this because prevention as always is better than cure.
Nonetheless, in order not to live you handicapped and confused, we have provided some solution that will help you get your computer back to normal and full functionality within the shortest time possible. All you have got to explore is to select the options below and follow step by step the process to the latter to get the best result and get rid of MacBook Pro Black Screen of Death.
- Check Screen brightness Level
Check your screen brightness Level if your MacBook Pro is displaying a black screen. Sometimes it may be issued as simple as this causing you to have a black screen. The MacBook Pro screen must have been accidentally set too low. Ideally, your MacBook Pro should give you the appropriate brightness except if the light sensor is faulty or it is not set up. Therefore, it is crucial we start on advance measures to get rid of the MacBook Pro Black screen of death, carry out a simple check like this. If the light sensor is not set up or faulty, follow the procedure below to find out.
Step 1: Go to Apple Menu
Step 2: Navigate to System Preferences
Step 3: select displays and click Display
Step 4: Click Automatically Adjust Brightness
This can as well be done manually by using the brightness key (sunshine icon at the top).
- Fix MacBook Pro Black Screen of Death when Booting
It is possible to encounter a black screen when you boot or wake your system from sleep. If this is peculiar to you, then follow the step below:
- Put off the system and restart. You can as well force reboot your computer by doing the following
- Press down the Power button on the MacBook Pro until it shuts down
- After a few minutes, hold down the Power button again until it boots back up still.
This should help fix the black screen and get your system working again, but if not, try other options.
- Disconnect all Accessories to Fix Black Screen Issues
Sometimes, it might be due to an external device that is attached or plugged to your MacBook Pro that is causing your PC to display a black screen. Peripheral devices such as flash drives, CDs or DVDs, phones, external hard disk among others should be unplugged, and the system should be rebooted. This should eliminate the possibility of accessory interference and solve the problem.
The reason has been that some of these external devices can lead to errors when interacting with the operating system leading to issues such as the MacBook Pro Black Screen of Death.
Reset System Management Controller (SMC), NVRAM to Fix MacBook Pro Black Screen of Death
If the Black screen persists when waking up your PC, then you need to reset the Onboard Power Management and NVRAM to fix this issue. This is one of the common tricks used by many users to correct and fix any odd power and display issues on MacBook Pro.
- Turn off the Mac computer
- Disconnect the Power cable is connected to your system.
- Press and hold down a critical combination of Shift + Control + Option and Power button at the same time for approximately 12 seconds.
- Release the keys at the same time, plug in the Power cable and turn on the Mac again.
- Reboot the Mac again and this time holds down the essential combination of Command + Option + P + R concurrently for approximately 20 seconds, this should reset the NVRAM, and your Mac should discard the black screen of death.
- Fix with PRAM Reset
This is a similar step to the SMC reset above, and it comes in handy as well. You can do the following to correct this:
- Restart your Mac and as soon as you hear the boot chime, press and hold the critical combination of Command + Option + P + R keys together
- Once you understand the boot sound again, it means that the PRAM is reset
- Restart the Mac again.
It is expected that your MacBook Pro is back to normal and functions fully without displaying the black screen.
- Use Keypress Sequence to Fix MacBook Pro Black Screen of Death
You can also try using the Keypress sequence to fix the black screen quickly you are experiencing by doing the following:
- Press the Power button once (a dialogue box which you can’t see will pop up)
- Press key “S” on your keyboard (this is the shortcut to sleep the Mac).
- Press and hold the Power button force a hard shut down.
- Wait for about 15 seconds, then press the Power button again to turn on the Mac back.
- Check for malware or App Issues
The MacBook Black Screen could be as a result of malware issues or application issues. Applications that are not compatible with the OS or system drivers can result in this; likewise, when malware is present on your MacBook Pro, you will also have the same result. You can run a scan with your antivirus to kill any malware on Mac; moreover, you can identify any suspicious app on your Mac by rerunning CleanMyMac> Extensions Section > Launch Agents > Login.
- Reinstall MacOS
Reinstalling your MacOS should not be among your last resort and option to fall back on when all other quick fix action has proved abortive. Fortunately, you can carry out this procedure without formatting your computer, but to be on a safer side, you need to back up your data and other vital documents before performing this action.
- Check and Reset Disk Permission
Sometimes, broken disk permission error could be the reason why your screen is not displaying or boot normally as it ought to. To fix this issue, all you need do is to perform a CleanMyMac on your Mac. Do the following:
Step 1: Open the CleanMyMac app
Step 2: go to maintenance
Step 3: Repair Disk Permissions
Step 4: click “run” to perform the task.
- Contact Support
If you have done all of the above and ran out of options, yet the Black Screen of Death still displays, then you need to contact the manufacturer for more information and support. You can contact for assistance by calling the official Apple Support line or take your Mac to an Apple Store for service.
Conclusion on Quick Fix to MacBook Pro Black Screen of death [solved]
Macbook Pro Black Screen of Death can be annoying, and you can even lose your work and other vital data on the system. Many possible solutions are peculiar to what you are experiencing, but the ones provided in this article are the primary means to fix the Black screen of death. Also, I believe by now you can fix the black screen on your MacBook Pro. To ensure that your MacBook Pro black screen is fixed, follow any of the procedure provided above and take caution to avoid reoccurrence of the same next time.
Tag: Quick Fix To MacBook Pro Black Screen Of Death [Solved!]